diff options
Diffstat (limited to 'doc/check-health.md')
-rw-r--r-- | doc/check-health.md | 96 |
1 files changed, 96 insertions, 0 deletions
diff --git a/doc/check-health.md b/doc/check-health.md new file mode 100644 index 0000000..f94a0bf --- /dev/null +++ b/doc/check-health.md @@ -0,0 +1,96 @@ +Notify about health state +========================= + +[![GitHub stars](https://img.shields.io/github/stars/eworm-de/routeros-scripts?logo=GitHub&style=flat&color=red)](https://github.com/eworm-de/routeros-scripts/stargazers) +[![GitHub forks](https://img.shields.io/github/forks/eworm-de/routeros-scripts?logo=GitHub&style=flat&color=green)](https://github.com/eworm-de/routeros-scripts/network) +[![GitHub watchers](https://img.shields.io/github/watchers/eworm-de/routeros-scripts?logo=GitHub&style=flat&color=blue)](https://github.com/eworm-de/routeros-scripts/watchers) +[![required RouterOS version](https://img.shields.io/badge/RouterOS-7.13-yellow?style=flat)](https://mikrotik.com/download/changelogs/) +[![Telegram group @routeros_scripts](https://img.shields.io/badge/Telegram-%40routeros__scripts-%2326A5E4?logo=telegram&style=flat)](https://t.me/routeros_scripts) +[![donate with PayPal](https://img.shields.io/badge/Like_it%3F-Donate!-orange?logo=githubsponsors&logoColor=orange&style=flat)](https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=A4ZXBD6YS2W8J) + +[⬅️ Go back to main README](../README.md) + +> ℹ️ **Info**: This script can not be used on its own but requires the base +> installation. See [main README](../README.md) for details. + +Description +----------- + +This script is run from scheduler periodically, sending notification on +health related events: + +* high CPU utilization +* high RAM utilization (low available RAM) +* voltage jumps up or down more than configured threshold +* voltage drops below hard lower limit +* power supply failed or recovered +* temperature is above or below threshold + +Note that bad initial state will not trigger an event. + +Monitoring CPU and RAM utilization (available processing and memory +resources) works on all devices. Other than that only sensors available +in hardware can be checked. See what your hardware supports: + + /system/health/print; + +### Sample notifications + +#### CPU utilization + +![check-health notification cpu utilization high](check-health.d/notification-01-cpu-utilization-high.avif) +![check-health notification cpu utilization ok](check-health.d/notification-02-cpu-utilization-ok.avif) + +#### RAM utilization (low available RAM) + +![check-health notification ram utilization high](check-health.d/notification-03-ram-utilization-high.avif) +![check-health notification ram utilization ok](check-health.d/notification-04-ram-utilization-ok.avif) + +#### Voltage + +![check-health notification voltage](check-health.d/notification-05-voltage.avif) + +#### Temperature + +![check-health notification temperature high](check-health.d/notification-06-temperature-high.avif) +![check-health notification temperature ok](check-health.d/notification-07-temperature-ok.avif) + +#### PSU state + +![check-health notification psu fail](check-health.d/notification-08-psu-fail.avif) +![check-health notification psu ok](check-health.d/notification-09-psu-ok.avif) + +Requirements and installation +----------------------------- + +Just install the script and create a scheduler: + + $ScriptInstallUpdate check-health; + /system/scheduler/add interval=53s name=check-health on-event="/system/script/run check-health;" start-time=startup; + +> ℹ️ **Info**: Running lots of scripts simultaneously can tamper the +> precision of cpu utilization, escpecially on devices with limited +> resources. Thus an unusual interval is used here. + +Configuration +------------- + +The configuration goes to `global-config-overlay`, these are the parameters: + +* `CheckHealthTemperature`: an array specifying temperature thresholds for sensors +* `CheckHealthVoltageLow`: value (in volt*10) giving a hard lower limit +* `CheckHealthVoltagePercent`: percentage value to trigger voltage jumps + +> ℹ️ **Info**: Copy relevant configuration from +> [`global-config`](../global-config.rsc) (the one without `-overlay`) to +> your local `global-config-overlay` and modify it to your specific needs. + +Also notification settings are required for +[e-mail](mod/notification-email.md), +[matrix](mod/notification-matrix.md), +[ntfy](mod/notification-ntfy.md) and/or +[telegram](mod/notification-telegram.md). + +--- +[⬅️ Go back to main README](../README.md) +[⬆️ Go back to top](#top) |